Millex 25mm PVDF 0.22um Sterile w/Vent

Code: slgvv255f D2-231

Application

A 25 mm diameter sterile syringe filter with a 0.22 µm pore size hydrophilic PVDF membrane. Comes in a pack of 50.

Direct patient care: Yes, location d...


read more

Your Price
£406.00 EACH
£487.20 inc. VAT

Application

A 25 mm diameter sterile syringe filter with a 0.22 µm pore size hydrophilic PVDF membrane. Comes in a pack of 50.

Direct patient care: Yes, location dependent

General description

Filter Code: GV

Available in 4, 13, 25, 33, and 50 mm diameters with a variety of membranes, Millex® sterile syringe filters are ideal for sterilizing organic solvents, aqueous solutions or air/gas. Many sample preparation methods specify Millex™ filters because of their unsurpassed quality and consistency. Millex™ filters not only feature minimal hold-up volume and faster flow rates, but they also withstand higher operating pressures and are chemically compatible with a range of samples and solvents to minimize leaching of extractable impurities. Millex™ filters are produced in a controlled, automated environment with the highest quality standards. Sterile devices come with a certificate of quality, with select devices marked for medical applications.

Features & Benefits:
Tailored to a variety of applications based on membrane type, housing and validation rating

Medical Device-rated devices in some countries including vented devices for direct patient care

Specialized filter units to protect hemodialysis transducers from blood and moisture and for vacuum line protection

Low extractables and low absorption membranes for minimum sample losses

Faster flow rates and higher operating pressures for high performance needs

Applications:
Sterilization of Aqueous Solutions, Organic Solvents and Gases, Filtration of High Value Protein or Small Molecule Components, Select Medical Device Applications (Some Including Direct Patient Care Depending on Country/Region)

The Vented Millex®-GV filter unit SLGVV255F are syringe filters for sterilization of low volume aqueous solutions for direct patient care applications, where venting and low protein binding membrane are required or desired.

Legal Information

Durapore is a registered trademark of Merck KGaA, Darmstadt, Germany

Millex is a registered trademark of Merck KGaA, Darmstadt, Germany

Luer-Lok is a registered trademark of Becton-Dickinson & Co.

Other Notes

Directions for Use Organism Retention: Microorganisms Mode of Action: Filtering Application: Sterile Filtration Intended Use: Sterilization of aqueous solutions including medical applications depending on country/region Instructions for Use: Please refer to Instructions for Use section of user guide (packaged in box) Storage Statement: Store in dry location Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.

Physical form

Color Code: Clear inlet/yellow outlet

Preparation Note

Sterilization MethodEthylene oxide

availabilityavailable only in USA, Europe, Australia, Canada, Thailand, Malaysia
diam.2.5 cm
featureholdup volume﹤ 0.1 mL, hydrophilic
filter diam.25 mm
filtration area4 cm2
fittingmale Luer outlet slip, female Luer-Lok® inlet connection, female Luer-Lok® inlet fitting
H25 mm
manufacturer/tradenameMillex®
materialPVC housing, PVDF membrane
matrixDurapore®
parameter5 bar max. inlet pressure (75 psi), 100 mL sample volume, 45 °C max. temp., 100 mL process volume
pore size0.22 µm pore size
product lineMillex®
Quality Level600
shipped inambient
sterilitysterile; ethylene oxide treated
technique(s)sterile filtration: suitable (sterilization of drugs or aqueous solutions administered intravenously), sterile filtration: suitable (sterilization of tissue culture media, protein solutions or aqueous solutions)
This product has met the following criteria: