These compact tube furnaces with integrated control systems can be used universally for many processes. Equipped with a standard working tube of C 530 ceramic and two fiber plugs, these tube furnaces have a very good price/performance ratio.

Standard Equipement:

• Tmax 1200 °C or 1300 °C
• Single-zoned design
• Outer tube diameter of 50 mm to 170 mm, heated length from 250 mm to 1000 mm
• Ceramic working tube C 530 including two fiber plugs for operation under air see
• Thermocouple type N (1200 °C) or type S (1300 °C)
• Heating elements on support tubes provide for free radiation
• Controller B510 (5 programs with each 4 segments), alternative controllers available

Additional Equipment:

• Over-temperature limiter with adjustable cutout temperature as temperature limiter to protect the oven and load
• Charge control with temperature measurement in the working tube
• Three-zoned design (heated length from 500 mm) for optimization of temperature uniformity
• Alternative working tubes
• Gas supply systems 1, 15, 2, 3 or 4 see page 58 of Brochure for more information

*This is designed to be a representation of the features available for this range. For more technical information and information on additional equipment please consult the brochure and reach out for a quote. This furnace features no safety technology for processes which produce combustible mixtures, for example debinding. If the furnace is still used for such processes despite this fact, the concentration of organic gas mixtures in the furnace must never exceed 3% of the lower explosion limit (LEL). This pre-requisite applies not only to normal operation but, in particular, to exceptional situations such as process disruptions (caused, for example, by the failure of a power unit). You must ensure that the furnace is adequately ventilated and vented. *