These compact tube furnaces are used when laboratory experiments must be performed horizontally, vertically, or at specific angles. The ability to configure the angle of tilt and the working height, and their compact design, also make these tube furnaces suitable for integration into existing process systems.

Standard Equipment:

• Tmax 1100 °C, 1300 °C, or 1500 °C
• Compact design
• Vertical or horizontal operation infinitely adjustable
• Angle infinitely adjustable from 0° to 90°
• Working height infinitely adjustable
• Operation also possible without stand if safety guidelines are observed
• Ceramic working tube C 530 including two fiber plugs for operation under air
• Type S thermocouple
• Heating wires wound directly around the working tube resulting in very fast heatup rates
• Control system integrated in furnace base
• Controller B510 (5 programs with each 4 segments), other controllers available on request

Additional Equipment:

• Over-temperature limiter with adjustable cutout temperature as temperature limiter to protect the oven and load
• Gas supply system 1 for non-flammable protective or reactive gas

*This is designed to be a representation of the features available for this range. For more technical information and information on additional equipment please consult the brochure and reach out for a quote. This furnace features no safety technology for processes which produce combustible mixtures, for example debinding. If the furnace is still used for such processes despite this fact, the concentration of organic gas mixtures in the furnace must never exceed 3% of the lower explosion limit (LEL). This pre-requisite applies not only to normal operation but, in particular, to exceptional situations such as process disruptions (caused, for example, by the failure of a power unit). You must ensure that the furnace is adequately ventilated and vented. *