These units allow the user to control humidity levels above and below ambient conditions. All units are equipped with the latest in Humidity Sensor technology with PID control and your choice of a Desiccant Drying System or a Dry Gas Purge System and ultra sonic humidification System.

Two standard styles available: a clear polycarbonate unit that features a lower cost to purchase, and relatively lower cost to customiSe. The aluminium units while more expensive on initial purchase are a longer lasting, sturdy build that with the addition of tempered glass can be used in highly corrosive chemical use. Polycarbonate units have four standard sizes and aluminium units have two to choose from.

The automatic controller provides monitoring and control of the relative humidity. It activates the necessary system (dehumidification for humidification) when the moisture level deviates from the adjustable set point. Flow rates, sensor position, and air circulation, were all considered in the design to maximize control capabilities and humidity uniformity across the glove box. System is a complete closed loop, dry gas is vented to room air or upgrade to a seal pressure relief system and route any excess gas to a filter or designated location in the lab.

• Humidifier: the Ultra Sonic Humidifier vibrates the water in the reservoir to provide a cloud of mist that is pushed into the glove box from the pump system. At the same time air is pulled out of the glove box and circulated through the water reservoir, completing the Humidification System’s closed loop circuit. Water reservoir is equipped with Self Sealing Quick Disconnect inlet for refilling under sealed conditions
• Drying Systems: two systems are available to dry these Humidity Control Glove Boxes a Desiccant Drying System and a Dry Gas Purge System. The Desiccant System is standard however the Dry Gas Purge System can be substituted at no extra cost. The Gas Purge System, provides faster drying times and requires less maintenance (Desiccant needs to be rejuvenated) and is consider a “cleaner” process although individual tanks do vary on particulate load. The Desiccant Drying system can be a lot less expensive to operate. The two systems can also be used to work together to minimise the cost of the dry gas purge system.
• Gloveless Sleeves: all glove boxes are equipped with gloveless sleeves to allow superior handling of interior samples. However the moisture from skin does influence Humidity levels below 15% Rh and for these applications the user may need to operate with gloves which can easily placed over the Coy gloveless sleeve cuff
• Transfer Chamber Option: all units have an optional pass thru chamber (air lock) available. This enables transfer of equipment and samples with out drastic changes to the interior environment
• Side Doors: all units feature a large side entry door (left side placement) that allows easy access to the glove box interior for cleaning or installation of large equipment. Upgrade any Polymer Glove Box to a removable front panel for extremely large items transfer